Fig1.This graph represents the behaviour of laminar jet with different inclinations in order to obtain respectively the maximum height and maximum throw while keeping intact its characteristic laminar.
Extraordinary and fascinating: therefore it can be described this jet whose aspect is of one nearly absolute perfection. Therefore transparent and I polish from it is made to cross from the light for all its length, absolutely silent, does not produce the minimal spray when it falls back in the water. These are its main qualities and for which its employment particularly is indicated in inner atmospheres.
• Construction material: Aisi 304 stainless steel
• Diameter of exit nozzle: 12,5 mm.
• Inlet diameter water: 1”1/2 Male GAS
• Weight of jet pedestal more:9,80 kos
• Maximum throw (with quality laminar jet) G 4,20 m. H 1,02 m. 45° inclination
• Maximum height (with quality laminar jet) H 1,90 m. G 2,10 m. 18° inclination
• Maximum flow (with quality laminar jet) 45 l/m’
• Lighting diode LED in RGB to control options in DMX 512
The characteristics of throw and height in the table refer to a temperature of 20°C.
Changes in temperature above 5°C causes a significant change in these values, ie, how much lower the temperature is better will be the performance.
The jet is supplied complete with pedestal and goniometer that allows the tilt from horizontal to vertical.
The eyelets in the pedestal allows adjustment of the direction of jet of ± 4°.
On request can be realized other formats as necessary.
ATTENTION for a smooth functioning, you must insert a prefilter at least of 150 mesh in series with the feeding pipe of the jet.
